
Bike Servicing
All prices quoted are for labour only
Safety Check £45
Get your bike back on the road today, this is ideal if you haven’t used your bike in a while and needs a looking over.
Our safety check includes:
-
-
- Frame & forks checked for alignment and damage.
- Wheels checked for damage and wear.
- Brakes checked for effective operation and adjusted.
- Gears checked for effective operation and adjusted.
- Rear derailleur hanger checked and straightened if necessary.
- All nuts & bolts are checked and tightened.
- Tyres are inflated to the correct pressure.
-
Single Speed Service £60
This service is tailored for single speed bicycles using only one gear.
Our single speed service includes:
-
-
-
- Frame & forks checked for alignment and damage.
- Wheels checked for damage and wear, wheels trued and spokes tensioned.
- Hubs are checked for effective operation and adjusted if necessary.
- Drivetrain (chain, sprocket and chain set) – removed, cleaned, checked for wear and re-lubricated.
- Brakes checked for effective operation and adjusted.
- Bike frame and wheels are cleaned.
- All nuts & bolts are checked and tightened.
- Tyres are inflated to the correct pressure.
- Hubs are checked for effective operation and adjusted if necessary.
- Bottom bracket checked for wear & adjusted if necessary / applicable
- Headset checked for play & adjusted (if necessary).
Additional cost for labour if necessary
-
- + Bottom bracket fitting – £12.50
- + Headset fitting – £12.50
- + Bar tape fitting – £10
- + Hub service (per hub) – £10
- + Hydraulic disc brake bleeding £12.50
-
-
General Service £80
If you use your bike regularly and require a step up from our safety check, then this service is ideal for you.
Our general service includes:
-
-
- Frame & forks checked for alignment and damage.
- Wheels checked for damage and wear, wheels trued and spokes tensioned.
- Drivetrain (chain, cassette and chainset) – removed, cleaned, checked for wear and re-lubricated.
- Brakes checked for effective operation and adjusted.
- Gears checked for effective operation and adjusted.
- Rear derailleur hanger checked and straightened if necessary.
- Bike frame and wheels are cleaned.
- All nuts & bolts are checked and tightened.
- Tyres are inflated to the correct pressure.
- Hubs are checked for effective operation and adjusted if necessary.
- Bottom bracket checked for wear & adjusted if necessary / applicable.
- Headset checked for play & adjusted (if necessary).
- Additional cost for labour if necessary
-
- + Bottom bracket fitting – £12.50
- + Headset fitting – £12.50
- + Bar tape fitting – £10
- + Hub service (per hub) – £10
- + Hydraulic disc brake bleeding £12.50
-
-
Brompton General Service £90
This service is specifically tailored for Brompton folding bicycles only.
Our brompton general service includes:
-
-
- Frame & forks checked for alignment and damage.
- Wheels checked for damage and wear, wheels trued and spokes tensioned.
- Hubs are checked for effective operation and adjusted if necessary.
- Drivetrain (chain, sprocket and chain set) – removed, cleaned, checked for wear and re-lubricated.
- Brakes checked for effective operation and adjusted.
- Gears checked for effective operation and adjusted.
- Bike frame and wheels are cleaned.
- All nuts & bolts are checked and tightened.
- Tyres are inflated to the correct pressure.
- Bottom bracket adjusted or replaced if necessary (additional cost for the parts).
- Headset adjusted or replaced if necessary (additional cost for the parts).
- Hubs are checked for effective operation and adjusted if necessary.
Additional cost for labour if needed.
-
-
- Brompton hinge pin replacement £40
- Brompton swing & bushing replacement £30
-
-
Full Service £100
If you are looking for a more in-depth service then our general service this will cover every aspect of your bike with a full strip down of the bike and carefully examine each part of your bike for safe operation and effectiveness.
Our full service includes:
-
-
- Frame & forks checked for alignment and damage, threads cleaned and checked, frame and disc mounts faced (if applicable).
- Wheels checked for damage and wear, wheels trued and spokes tensioned.
- Drivetrain (chain, cassette and chainset) – removed, cleaned, checked for wear and re-lubricated (replacement fitted if necessary at additional cost for the part).
- Brake calipers/brake arms removed, cleaned, refitted and adjusted.
- Gears checked for effective operation and adjusted.
- Rear derailleur hanger checked and straightened if necessary.
- Bike frame and wheels cleaned.
- All nuts & bolts are checked and tightened.
- Tyres are inflated to the correct pressure.
- Hubs are checked for effective operation and adjusted, hubs disassembled, cleaned, inspected and reassembled.
- Bottom bracket removed, cleaned, regreased, fitted & checked for movement, replaced if necessary (additional cost for the bottom bracket).
- Headset removed, cleaned, regreased (if applicable), fitted & checked for movement, replaced if necessary (additional cost for the headset).
Additional cost for labour if necessary.
-
-
- + Bar tape fitting – £10
- + Hub service (per hub) – £10
- + Hydraulic disc brake bleeding £12.50
-
-
Complete rebuild £140
Our complete rebuild is focused at bikes that require more than just a service, such as: new groupset being fitted, frame swap & in some cases, a service that is long overdue. This will cover every aspect of your bike with a full strip down of the bike and carefully examine each part of your bike for safe operation and effectiveness.
Our complete rebuild includes:
-
-
- Frame & forks checked for alignment and damage, threads cleaned and checked, frame and disc mounts faced (if applicable).
- Wheels checked for damage and wear, wheels trued and spokes tensioned.
- Drivetrain (chain, cassette and chainset) – removed, cleaned, checked for wear and re-lubricated (replacement fitted if necessary at additional cost for the part).
- Brake calipers/brake arms removed, cleaned, refitted and adjusted.
- Gears checked for effective operation and adjusted.
- Rear derailleur hanger checked and straightened if necessary.
- Bike frame and wheels cleaned.
- All nuts & bolts are checked and tightened.
- Tyres are inflated to the correct pressure.
- Hubs are checked for effective operation and adjusted, hubs disassembled, cleaned, inspected and reassembled.
- Bottom bracket removed, cleaned, regreased, fitted & checked for movement, replaced if necessary (additional cost for the parts).
- Headset removed, cleaned, regreased (if applicable), fitted & checked for movement, replaced if necessary (additional cost for the headset).
- Bar tape fitting included if necessary, (additional cost for the bar tape).
Additional cost for labour if necessary.
-
-
- Hydraulic disc brake bleeding £12.50
-
-





Individual repairs
Please visit our Price list page for details on individual jobs.